Fujitsu SLS-FUJITSU-CG-512PA1V

<p> - Resolution of 540 Horizontal Lines (Colour)<br /> - Automatic Gain Control (AGC)<br /> - High Sensitivity of 0.1Lux at F1.2 (B&amp;W)<br /> - Removable IR Cut Filter<br /> - Back Light Compensation (BLC)<br /> - Electronic Shutter Control (ESC)<br /> - Automatic AI/DC Control Selection (Depend on Lens)<br /> - Integrated Eclipse and Flickerless Function<br /> - Automatic White Balance with Hold Function (AWB)<br /> - Auto Blemish Compensation (up to 32 Pixels)<br /> - Adjustable Video Transmission Distance<br /> - Supply Voltage: 230VAC<br /> - Video Standard: CCIR/PAL<br /> - System: Day &amp; Night<br /> - Sensor size: 1/3"<br /> - Imager: CCD, Sony Super HAD Interline Transfer CCD<br /> - Active picture elements: Approx. 440,000, 752(H) x 582(V)<br /> - Signal processing: Digital (DSP)<br /> - Synchronization: Internal/AC line lock<br /> - Signal-to-noise ratio: 48dB (AGC OFF)<br /> - Gamma correction: 0.6/1.0<br /> - Horizontal resolution: 540TVL, (colour), 570TVL (b&amp;w)<br /> - Sensitivity (at 50% video signal): 0,8Lux, at colour, 0.1Lux (B&amp;W) at F1.2<br /> - Light control range (ESC + AGC): 30,000:1<br /> - Light control range (AI + AGC): 600,000:1 (Iris range F1.4 ~ F300)<br /> - Electronic shutter control (ESC): 2.000:1 (On/Off switchable)<br /> - Integration rate: No<br /> - Signal amplification: 3 steps (for transmission distance short, middle, long)<br /> - Automatic gain control (AGC): Normal, High and ON/OFF switchable<br /> - Backlight compensation: BLC, eclipser, ON/OFF switchable<br /> - White balance (AWB): Auto/Hold<br /> - Blemish compensation: Automatic blemish detection and compensation (for up to 32 pixels)<br /> - Aperture Correction (APC): Horizontal and vertical<br /> - Flickerless function: 120sec., ON/OFF switchable<br /> - Eclipser function: On/Off, Treshold, Eclipse and Grey level<br /> - IR cut fitler: Yes, Motorized, switchable filter. Automatic function depend on the amount of light. Automatic/manual selectable by OSD menu. In, removed filter position, the colour signal will be switched off. Selectable time delay: 5Sec. or 30Sec., External D&amp;N, switching via external contact input<br /> - OSD function control: OSD camera setup: Pixel correction, Eclipser, Day&amp;Nignt, BLC, AWB, Chroma, ESC, AGC, Flickerless, Aperture, Masking (Window blanking), Transmission distance compensation<br /> - Lens mount: C/CS mount<br /> - Usable iris controls: Manual iris, Auto-Iris/DC controlled<br /> - Auto-Iris voltage supply: 9VDC (40mA max.)<br /> - External adjustments: Flange focus Switch for setup menu<br /> - Video outputs (type): CVBS<br /> - Video outputs: 1Vp-p, composite, 75ohms, BNC<br /> - External connections: Auto-/DC Iris (4-pin), Video (BNC), Day/Night switching (2-pin), Power input<br /> - Serial interfaces: No<br /> - Camera mount: 1/4" - 20 UNC thread on top and bottom<br /> - Supply voltage: 230VAC, (+/-15%) 50Hz<br /> - Power consumption: Approx. 12watts<br /> - Temperature range (Operation): 0 ~ +40°C<br /> - Weight: 400g<br /> - Parts supplied: 4-pin plug, Allan key, Manual on CD ROM<br /> <br /> <b>Accesorries</b><br /> WD-22<br /> Wall Mount Bracket with Ball Joint, 1/4" Camera Fixing Screw, Beige Grey<br /> <br /> WD-23<br /> Wall Mount Bracket with Ball Joint, 1/4" Camera Fixing Screw, Pantone 877</p>