<ul> <li> 19" Rack mountable: yes</li> <li> Activity detection: yes</li> <li> Alarm inputs: yes, 1x TTL, programmable as NC/NO</li> <li> Alarm output: 1x TTL NO/NC selectable</li> <li> Audio In-/Output: Line/ Microphone (Duplex transmission)</li> <li> Audio support: yes</li> <li> Certificates: CE</li> <li> Colour: Silver grey</li> <li> Compression standard: MPEG4</li> <li> Configuration: Via WebBrowser, Built-in WebServer</li> <li> Data rate: 32Kbit/sec. ~ 2Mbit/sec. (MPEG-4)</li> <li> Ethernet interface: 10Base-T, 100Base-TX, RJ-45</li> <li> Housing: Aluminium</li> <li> Image transm. rate max.: 25 B./Sek.</li> <li> Internal storage: yes</li> <li> Management Software Support: PG-Manager</li> <li> Network protocols: UDP, TCP/IP, DHCP, HTTP, FTP, PPPoE, SMPT, PPP, ARP</li> <li> Parts supplied: PSU, Instruction manual, Crossover LAN Cable, Programming software</li> <li> Password protection: yes</li> <li> Post-alarm recording: 120sec. max. at 2MB/sec.</li> <li> Power consumption: 4watts</li> <li> Power over Ethernet: no</li> <li> Pre-alarm recording: 30sec. max. at 2MB/sec.</li> <li> PTZ Support: yes</li> <li> Resolution max.: 704 x 576</li> <li> Serial interfaces: RS-485, RS-232, (PTZ control), RS-232C (Modem/Terminal)</li> <li> Software upgrade: Via software tool (from the viewer)</li> <li> Supply voltage: 9VDC (PSU 100~240VAC included)</li> <li> System requirements: Processor: Pentium III 800PC, 256MB RAM Microsoft Windows NT4.0/2000/XP/ME/98SE</li> <li> System: PAL/NTSC</li> <li> Temperature range (Operation): 0 ~ +40°C</li> <li> Video inputs (amount): 1</li> <li> Video resolution: 704x576 (D1), 352x288 (CIF), 160x128 (QCIF)</li> <li> Web browser: MS Internet Explorer Vers. 6.0</li> <li> Weight: appro. 300g</li> </ul>
